Winch
The winch that we designed and built is the most advanced, reliable and technologically advanced servo control for radio-controlled sailboats on the market today.
We looked far and we are not compromises: high tech plastics, carbon fiber reinforced gears, ball bearings
on all moving parts, output drum large bearing for maximum reliability, electronic microprocessor High SoC speed, magnetic encoder microprocessor-based high-resolution in substitution of the potentiometer and, for versions brushless, microprocessor ASIC motor control.
All winches have as standard equipment the innovative, microprocessor high-resolution magnetic encoder and programming interface ProCard™ with LCD.
The gears are made of high-tech polymer CarbonHF™ reinforced with carbon fiber, fully on ball bearings.
All winches have as standard equipment the Double System Drum™ that allows you to use either as Standard Drum or as Self Tension-ing Drum.
The gears are made of high-tech polymer CarbonHF™ reinforced with carbon fiber, fully on ball bearings.
All winches have as standard equipment the Double System Drum™ that allows you to use either as Standard Drum or as Self Tension-ing Drum.
Standard equipment:
- Winch Encoder System™, complete with battery cables (1 mm2 - 17 AWG - length 300 mm), radio control cable with pins compatible with Graupner Tx-Rx - JR - Futaba - Hitec (length 300 mm), power wire with bridge (length 300 mm), prepared for control switch (optional). Double System Drum™ Ø 32 mm with washer and stainless steel button head cap screws M3x20 TBEI, spring for right rotation, left rotation spring, locking pins.
- The special Double System Drum™ diameter 32 mm allows its use both as Self Tensioning Drum (drum which allows to tighten the winch pull sheet without com-pensation spring) and as Standard Drum (drum without self-tensioning springs).
- Hull monting stainless steel button head cap screws M3x10 with washer.
- Bridge.
- USB pen containing the user manual and maintenance, spare parts drawing, mounting templates, warranty and various technical documents.
- Quick access manual.
- Standard programming interface ProCard™ that allows editing or viewing of standard parameters stored directly to allow the immediate use on the boat.
Specifications:
- Supply voltage from 4,8 to 9 V.
- Advanced drum speed control functions (from zero to 127,99 turns with a resolution of 0.01 rpm.
- Settable failsafe position.
- Settable 5V 2A receiving power [BEC].
- Advanced control functions and setting of battery operating voltage, battery shutdown set for minimum or maximum settable voltage.
- Automatic and manual transmitter recognition transmitter is automatic and manual, incoming signal quality checking for maximum reliability.
- Linear travel system per la migliore risposta del verricello al comando radio.
- Quality control of input signal for maximum reliability.
- Stall protection.
- Driving motor mode with power MOSFET with temperature control and surge protection.
- High resolution magnetic encoder with microprocessor.
- High speed SoC microprocessor, BRUSHLESS versions motor control with dedicated ASIC microprocessor.
- External programmer with LCD ProCard™ standard display, optional ProUnit™
- High-tech polymer CarbonHF™ gears, carbon fiber reinforced, all on ball bearings.
- High tech CarbonHS™ body reinforced in carbon fibre.
- Standard Self Tensioning Drum.
The winch is available in three versions:
- Brush X Series 280 with brush motor size 280: the best power-speed ratio.
- Brush R Series 380 with brush motor size 380: the raw power for boats of large dimensions.
- Brushless X series 280 with brushless motor size 280: the power of the brushless motor united at the speed of X series for boats with high performance.
WINCH DIMENSIONS.pdf (332 Kb)WINCH DIMENSIONS - HULL MOUNTING.pdf (448 Kb)
Browse By
- Category
-
- QuickWinch (6)
- Easy Winch (3)
- Drums and accessories (10)
- Service (47)
- Winch Update (0)
My Basket
You have no items in your shopping cart.
Newsletter
